Coriolis Mass Flow Meters

What Is A Coriolis Flow Meter?

Coriolis flow meters rely on the Earth’s Coriolis effect to measure fluid mass flow rates. Inside the flow body of a SmartMeasurement Coriolis meter, flow is diverted into two parallel sensor flow tubes, which are vibrated in opposition to one another by an energized drive coil. The mass flow meter’s phase shift, measured by Hall Effect sensors mounted at the sensor tubes’ inlet and outlets, is caused by the Coriolis effect and is directly proportional to the mass of the media flowing through the tubes. Thus, the Coriolis flow meter is a true mass flow meter.

For further information on our Coriolis meters’ principles of operation, please visit our Coriolis Technology page.
 

SmartMeasurement’s Coriolis Meters

In addition to providing a direct mass flow reading, our Coriolis flow meters offer a number other advantages. Perhaps the biggest of these advantages is their multi-parameter measurement capability. SmartMeasurement Coriolis meters provide direct mass and volumetric flow rates, process temperature, and density readings.

These liquid flow meters also provide inferred readings for density-dependent parameters such as water-in-oil percentage, degrees Brix, and degrees Baume. Another advantage of our Coriolis flow meters is that they require no straight pipe runs upstream or downstream of the meter.

Request a quote today or contact SmartMeasurement to learn more about our Coriolis flow meter technology.

Hover mouse over icon for application notes.

 

Technology	Model/ Series	Gas Flow	Liquid Flow	Steam Flow	Line Size	Temperature	Pressure	Viscosity	Accuracy	Considerations
Coriolis	ALCM									Avoid vibration

The Right Mass Flow Meter for Your Application

SmartMeasurement offers Coriolis mass flow meters with several unique tube arrangements to best fit our customers’ unique needs.

We offer:

• U-Tubed (UT) Flow Meters
• Micro Bend Tube (MB) Flow Meters
• Delta Tubed (DT) Flow Meters

Our Coriolis meters are available for pipe diameters from ¼” to 8”. Flow rates vary by model, with options available to accommodate flows as low as 25 kg/hr up to 1,000,000 kg/hr.

The unique combination of features and capabilities offered by our ALCM family of Coriolis flow meters makes them the ideal choice for a broad range of industries and applications. Our Coriolis meters are used in:

• Food & Beverage
• Petrochemical
• Oil & Gas
• Paint
• Process Control
• and numerous other industries

Have a question about our Coriolis mass flow meters? Contact the experts at Smart Measurement today.

Coriolis Mass Flow Meter Family

ALCM - Coriolis Mass Flow Family
Technology	Model	Diameters	Flow Rate	Accuracy	Pressures	Temperature	Outputs	Approvals	Features and Advatages
U-Tubed Coriolis Meter	ALCM-UT	1¼”~8” (40-200 mm)	1,500～1,000,000 kg/hr	±0.5% of reading(std),  0.2% or 0.15% (opt)	928 psig (64 bar)	482 °F (250 °C)	4-20mA, 0-10 kHz pulse, RS485	NEPSI Exid ⅡB T4;  Exib ⅡC T 4  and CE	Best turndown*, higher flows than  ALCMDT similar sizes >2" (50mm)
Micro Bend Coriolis Meter	ALCM-MB	½" to 2" (8-50mm)	150~ 50,000Kg/hr	±0.5% of reading(std),  0.2% or 0.15% (opt)	928 psig (64 bar)	482 °F (250 °C)	4-20mA, 0-10 kHz pulse, RS485	NEPSI Exid ⅡB T4;  Exib ⅡC T 4  and CE	Better Turndown* and lower flows than ALCMDT for similar sizes <2" (50mm)
Delta Tubed Coriolis Meter	ALCM-DT	½"-8" (10-200mm)	150-900,000 kg/hr	±0.5% of reading(std),  0.2% or 0.15% (opt)	6000 psig (420 bar)	482 °F (250 °C)	4-20mA, RS 485, Modbus, HART	NEPSI Exid ⅡB T4;  Exib ⅡC T 4  and CE	Small size <2" (50mm) higher flows than ALCMMB, lager sizes >2'' (50mm) better lower flow than ALCMUT